Sailor Moon - Sailor Saturn - Journey Beyond 2014

I was given another commission from long time friend Sushimonster. She showed me the art from NoFlutter's version of the Sailor Scouts to draw from and I couldn't have been more excited to A.) Work on something from Sailor Moon B.) Not make a sword

First off here is the original art.

I talked to my client and reasoned with her that we'd just use the default Sailor Saturn staff as reference since the 2 didn't have any huge discrepancies.

I got some art and cropped enough to get a good side view to draft a pattern from.

Printed it out into card stock. The plan was to have the tang of the glaive socket around a plastic rod then have that weird clamshell on top of it to cover the rod.

Got a table leg from Home Depot. Drilled holes on the top and bottom and inserted the plastic rod on top, and a threaded bar on the bottom. This threaded bar matched the size of the retractable curtain rod I also bought.

Cut the blade from PVC foam and glued together for proper thickness. Super rough right?

Sanded the blade edges to get them clean and put a bevel into the blades. Carved some detail into the clam piece on the bottom of the blade.

Cut the "mace" portion on the bottom from 6mm PVC foam and attached to the curtain rod with JB Weld.

It all screws together!

Primed, painted and sanded

Delivered to client and they made some magic happen! Photo by BigWhiteBazooka. Thanks for reading!


  1. uggs sale nederland Of anders uggs sale online een idioot, zelfs de verkoop dertien Straat rinkelen weet het niet, ik ben het gras, borst echt groot. Je bent echt in de dertiende straat mix. Opnieuw gevraagd, uggs sale nederland goedkope hart ongelukkig, en het is, weet ik niet de naam van de straat in dertien luid uggs outlet online goedkope kleine knipoog gezegd. Je mengt goed. Tenslotte veranderd probleem. goedkoop uggs sale nederland gevoel als doorgaan met vraag jezelf is niet kinder uggs sale gemengd in dertien Street, twijfelt uggs sale nederland dat hij niet zelf ging naar een andere wereld te gaan.

  2. Hello. Wonderful work on Saturn's Glaive! If I may ask, what was the thickness of the PVC foam that you used for the blade portion of the glaive? I see you glued two pieces of the foam together for this part. Did you also use 6mm PVC foam like you did for the "mace" portion at the bottom? Thank you in advance.