League of Legends - Gladiator Draven - DragonCon 2013

I was up to do my first DragonCon and I really wanted to show a costume that I could be proud of. Unfortunately NOTHING I have can be easily packed onto an airplane. So for this reason I had to go into a costume thinking about portability first and foremost. I wound up picking Draven since a lot of people have suggested me for him. Granted I can't play him at all. I can't ADC, you kidding me?

In any case here are the references.





First was to make the silhouette of the weapons then print them out.







I wound up making one of his axes (the first one referenced and the left hand one printed out) more slender because it looked completely fucktarded in real life.

I cut out the silhouette from 6mm PVC foam, then glued them together.



A channel was cut and a wooden rod was glued in place.




Cut the circular pieces for the handguard with our handy circle cutting jig. It's not a fancy machine... it's a board with a bolt in it. I'm not lying.



The rod was sawed and then sanded flush along the blade channel, also put down the base for the circle handguards.



Layered them up for depth.



Then put a layer of 3mm on top to give that cracked detail.



Layed down Bondo auto body filler on the wood to hide the seam.



Beveled the edges with an angle grinder and orbital sander.



Cleaned up the edges with some Bondo on the blade bevels.



Had to heat some acrylic triangle extrusion to give the handguards more detail and depth. Heated them around a disc I cut earlier for the best circle possible.



Layed down the spike bits on the handguards.



Put down a layer of primer then some red paint. Decided it was too bright, so put down a darker red.





Taped it off for a coat of silver.



Dropped silver down and it was good to go!



Armor was a really simple build. Thigh plates and leg armor started out as flat plates of PVC foam that were heat formed.



Made the crown the same way, this isn't the crown I wound up using since it wasn't accurate but you get the idea. Not pictured but it velcroes in the back in the final build.



Bracer and shoulder guard were also PVC foam heat shaped. The base structure for the horn was put down.



Added more for the horn base.



Added Model Magic to the horn base. Wasn't really necessary though just had it lying around and didn't feel like having it hollow.





Glued a plate of PVC foam onto the horn base.



Cut out and glued trim to the thigh plates. Weathered it with a box cutter and carved out some cuts and gashes.



Added some trim to the bracer.



Did the same weathering to it as well. Again carved with a box cutter.





Filled in the bracer spikes with Apoxie Sculpt. Primed and painted everything. Wound up changing the colors of the thigh plates to a copper color instead of charcoal.





Super glued vinyl to the bracer for a nice leathery effect.





Wound up snapping the thigh plates directly to the red belt piece.



Cut the straps off some sandals for the required effect.



Everything is done, so let's talk about packing it all. The armor fits into any standard suitcase or box, so just use common sense and pad your stuff with clothes etc etc.

For the weapons I just cut out some foam from Home Depot into the shape of my weapons then taped them all together. Remember, the goal of packing for a plane trip is to make sure that your gear DOES NOT move around in the box. Less movement means less possibility for a breakage.





Reinforced the outside of the box with tape and cardboard.



TSA has torn this box open 2 times now and I have flown Draven round trip to Atlanta from San Diego as well as to Ohio from San Diego. I feel that my method is tried and now tested haha.



Thanks for sticking around! Finished product was carted all over the place, from the venerable Dragon Con to a small convention in Dayton, Ohio called Epic Con. Even made it to the League of Legends World Championships for some fun with everyone! All in all, Draven does it all....with style.













6 comments:

  1. It's my impression or you got an Arlong's tattoo?? hahahaha
    Anyway, awesome cosplay!! Really good job!

    ReplyDelete
  2. I was up to do my first DragonCon and I really wanted to show a costume that I could be proud of. Unfortunately NOTHING I have can be easily ... corgicostume.blogspot.com

    ReplyDelete
  3. barbour jackets outlet cheap Having barbour sale turned slowly toward the gate, and then go behind the still stupidly said, go to your house booth, do not stunned by it. Oh. Quickly catch up to, although not barbour jackets outlet barbour outlet understand how cheap became sale, but how is the goal of the boss, but she could feel the faint family has saved. The home is in thirteen Street South Street end of the barbour jackets outlet street, barbour jackets outlet as opposed to thirteen Street downtown, where necessary deserted more.

    ReplyDelete
  4. harika olmuş be !

    Draven sayfasında Draven nasıl oynanır sorusunun cevabını ve Kabiliyet Dizilimi yer almaktadır. League of Legends

    ReplyDelete
  5. These are some great tools that i definitely use for SO work. This is a great list to use in the future..
    riot points

    ReplyDelete